Paranoid Android ROM build for OnePlus One that based on Android 4.4.4 KitKat is now available for download. By installing this custom firmware you can enjoy the latest Android 4.4.4 KitKat on your OnePlus One with lot of customization. Paranoid Android ROM with various notable features including Hybrid Engine, Pie Controls, Halo, Hover, Peek and Dynamic System Bars. The combine feature of Paranoid Android and Android 4.4.4 KitKat will surely amaze your using experience. To install this Android 4.4.4 KitKat based custom ROM on your OnePlus One, you must already have custom recovery installed. Read through this article to learn step-by-step guide about installing Android 4.4.4 Paranoid Android custom ROM on OnePlus One
Recommended Readings:
Paranoid Android ROM Features:
Warning!
This tutorial is only for OnePlus One. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for OnePlus One in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and OnePlus One. [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Paranoid Android ROM on OnePlus One.
File Required(Download by clicking on it)
Recommended Readings:
- Update OnePlus One To Android 4.4.4 KitKat Using MoKee ROM [How To]
- Install Android 4.4.4 CM11 Milestone 9 KitKat ROM on OnePlus One – How To Instruction
Paranoid Android ROM Features:
- Hybrid Engine - Per app color, per app dpi & per app layout
- Pie Controls - Alternate unobtrusive navigation controls
- Halo - Bringing multi-tasking to a whole new level
- Hover - Our take on redefining notifications and enhancing multitasking abilities
- Peek - An intuitive way to receive notifications
- Dynamic System Bars - Immersing you into a whole new experience using design tweaks
This tutorial is only for OnePlus One. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for OnePlus One in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and OnePlus One. [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Paranoid Android ROM on OnePlus One.
File Required(Download by clicking on it)
- Paranoid Android For OnePlus One [Filename: pa_bacon-4.6-BETA1-20140902.zip]
- Google Apps [Filename: pa_gapps-stock-4.4.4-20140906-signed.zip] or any other 4.4 KitKat GApps
How to Install Android 4.4.4 KitKat based Paranoid Android ROM on OnePlus One
- Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
- Disconnect USB and then turn off your OnePlus One.
- Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together. [in recovery use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
- Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
- Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
- Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Paranoid Android Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
- Once the ROM installation process end, repeat the step 6 but choose the gapps_kitkat-140619.zip file instead of ROM zip to install the Google apps package.
- When installation is completed, go back to the main recovery menu and select reboot system now to reboot your OnePlus One and boot up into Android 4.4.4 KitKat ROM Paranoid Android.
- Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
- Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
- Disconnect USB and then turn off your OnePlus One.
- Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together. Alternatively try this: Recovery Mode without Key Combination.
- Create a Backup using TWRP Backup Option.
- Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
- Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Paranoid Android Zip file. Then tap on Add More Zips, and add gapps_kitkat-140619.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
- When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your OnePlus One and boot up into Android 4.4.4 KitKat ROM Paranoid Android.
- Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
0 comments:
Post a Comment