Android 4.4.4 KitKat Omni ROM For Galaxy Tab 7 P1000 [How To]

Omni ROM build for Galaxy Tab 7 P1000 that based on Android 4.4.4 KitKat is now available for download. By installing this custom firmware you can enjoy the latest Android 4.4.4 KitKat on your Galaxy Tab 7 P1000. Android 4.4.4 KitKat do comes with various added features over previous Android version. By installing Omni ROM you also receive features that a stock Android 4.4.4 KitKat AOSP build can't offer. Though the build we adding in download section is nightly build which update daily with many improvements over previous build. To install this Android 4.4.4 KitKat based custom ROM on your Galaxy Tab 7 P1000, you must already have custom recovery installed. Read through this article to learn step-by-step guide about installing Android 4.4.4 Omni ROM custom ROM on Galaxy Tab 7 P1000.

Recommended Readings:

• Update Galaxy Tab 7 P1000 To Android 4.4.2 KitKat via Omni Nightly–How To
• Update Galaxy Tab 7 P1000 To Android 4.4.2 KitKat via CM11 Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Tab 7 P1000. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Tab 7 P1000 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Tab 7 P1000. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Tab 7 P1000.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Tab 7 P1000  [Filename: omni-4.4.4-20140819-p1-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Tab 7 P1000

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Tab 7 P1000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Tab 7 P1000 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Tab 7 P1000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Tab 7 P1000 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Tab 7 P1000. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Update Sony Xperia ZL with Android 4.4.4 Omni ROM KitKat [How To]

You can now download and install Android 4.4.4 KitKat based custom firmware Omni ROM on your Sony Xperia ZL. Omni ROM developers recently release nightly build that enable Android 4.4.4 KitKat on your Sony Xperia ZL. A nightly build see update daily with more features and fixes. With Android 4.4.4 KitKat you can enjoy so many new features as well as security and performance improvements. The Omni ROM builds itself comes with so many customization that you won't see in a stock firmware and can't just avoid. Omni ROM mostly known for its multi-window feature. We summed up a detail installation tutorial of Android 4.4.4 KitKat based Omni ROM custom ROM on Sony Xperia ZL below.

Recommended Readings:

• Update Sony Xperia ZL To Android 4.4.2 KitKat via Omni Nightly–How To
• Update Sony Xperia ZL To Android 4.4.2 KitKat via AOKP ROM–How To
• Update Sony Xperia ZL To Android 4.4.2 KitKat via CM11 Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Sony Xperia ZL. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Sony Xperia ZL in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Sony Xperia ZL. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Sony Xperia ZL.

File Required(Download by clicking on it)

1. Omni Nightly For Sony Xperia ZL  [Filename: omni-4.4.4-20140819-odin-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Sony Xperia ZL

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Sony Xperia ZL.
3. Now, boot into recovery mode. To do so, reboot phone and press Volume Up button few times while booting. [in recovery use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Sony Xperia ZL and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Sony Xperia ZL.
3. Now, boot into recovery mode. To do so, reboot phone and press Volume Up button few times while booting. [in recovery use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Sony Xperia ZL and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Sony Xperia ZL. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Update Galaxy Note 10.1 N8013 with Android 4.4.4 Omni KitKat Custom ROM [How To]

You can now download and install Android 4.4.4 KitKat based custom ROM Omni ROM on your Galaxy Note 10.1 N8013. Omni ROM developers team recently rolled out nightly build that enable Android 4.4.4 KitKat on your Galaxy Note 10.1 N8013. The nightly build we talking about can be used for daily purpose but you should expect some bugs which will eventually fixed as development progress. Android 4.4.4 KitKat do have some big changes over previous Android version and with mix of Omni ROM builds it will be awesome experience. We summed up a detail installation tutorial of Android 4.4.4 KitKat based Omni custom ROM on Galaxy Note 10.1 N8013 below.

Recommended Readings:

• Update Galaxy Note 10.1 N8013 To Android 4.4.2 KitKat via Omni Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Note 10.1 N8013. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Note 10.1 N8013 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Note 10.1 N8013. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Note 10.1 N8013.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Note 10.1 N8013  [Filename: omni-4.4.4-20140819-n801x-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Note 10.1 N8013

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8013.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 10.1 N8013 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8013.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 10.1 N8013 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Note 10.1 N8013. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Update Galaxy Note 10.1 N8010 To Android 4.4.4 KitKat Using Omni ROM [How To]

The nightly build of Omni ROM that based on Android 4.4.4 KitKat is now available for Galaxy Note 10.1 N8010. The recent Android 4.4.4 KitKat AOSP suggest that this build have some security and feature improvements that you can't just avoid. Also with a custom ROM like Omni ROM you not only experience the AOSP but also many additional customization. Omni ROM (nightly) build considered a stable version with very few bugs (if there is any). If you own Galaxy Note 10.1 N8010 with a custom recovery installed then can easily install Android 4.4.4 KitKat based custom ROM. We summed up a detail step-by-step installation guide below along with some necessary tips.

Recommended Readings:

• Update Galaxy Note 10.1 N8010 To Android 4.4.2 KitKat via Omni Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Note 10.1 N8010. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Note 10.1 N8010 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Note 10.1 N8010. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Note 10.1 N8010.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Note 10.1 N8010  [Filename: omni-4.4.4-20140819-n801x-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Note 10.1 N8010

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8010.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 10.1 N8010 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8010.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 10.1 N8010 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Note 10.1 N8010. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Install Android 4.4.4 KitKat Omni ROM on Samsung Galaxy Note 10.1 GT-N8000 [How To]

Omni ROM build that based on Android 4.4.4 KitKat is now available for Galaxy Note 10.1 N8000. We learned that Android 4.4.4 KitKat comes with various new features and security improvements over previous Android version, so you probably want to try it on your device. And with mix of Omni ROM its get so many interesting tweak that you can't avoid. Omni ROM (nightly) build can be used for daily purpose but there will be some bugs on it. Omni ROM known for various customization and features that give your Android using experience a different direction. You can install Android 4.4.4 KitKat based custom ROM Omni ROM on Galaxy Note 10.1 N8000 by following our tutorial below.

Recommended Readings:

• How To Root Samsung Galaxy Note 10.1 GT-N8000–Simple Guide
• Update Galaxy Note 10.1 N8000 To Android 4.4.2 KitKat via Omni Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Note 10.1 N8000. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Note 10.1 N8000 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Note 10.1 N8000. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Note 10.1 N8000.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Note 10.1 N8000  [Filename: omni-4.4.4-20140819-n8000-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Note 10.1 N8000

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 10.1 N8000 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 10.1 N8000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 10.1 N8000 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Note 10.1 N8000. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Download Android 4.4.4 KitKat Omni ROM For Samsung Galaxy Note 2 GT-N7100 [How To]

Download and install Android 4.4.4 KitKat based Omni ROM custom firmware on Galaxy Note 2 N7100. The latest Android 4.4.4 KitKat comes with various new features and we recommend you to update your device to this build. As there is no official Android 4.4.4 KitKat firmware yet, you have to go with custom ROM. Omni ROM is a custom ROM that offer you bloatware free AOSP like experience but with lot more customization and control. Omni ROM (nightly) build considered a daily use version with few bugs. The latest release of Omni ROM is based on Android 4.4.4 KitKat. You can read through this article to know the steps to install Android 4.4.4 KitKat based Omni ROM on Galaxy Note 2 N7100.

Recommended Readings:

• Install Android 4.4.4 CM11 Milestone 9 KitKat ROM on Galaxy Note 2 GT-N7100 – How To Instruction
• Update Galaxy Note 2 GT-N7100 To Android 4.4.2 KitKat via Omni Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Note 2 N7100. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Note 2 N7100 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Note 2 N7100. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Note 2 N7100.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Note 2 N7100  [Filename: omni-4.4.4-20140819-n7100-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Note 2 N7100

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 2 N7100.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave only Power button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 2 N7100 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note 2 N7100.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave only Power button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 2 N7100 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Note 2 N7100. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

How To Install 4.4.4 KitKat on Samsung Galaxy Note GT-N7000 via Omni ROM Tutorial - Guide

Galaxy Note N7000 can now be updated to Android 4.4.4 KitKat based Omni ROM custom firmware. ROM released by Omni ROM developers recognized as one of the most featured rich and customized ROM and this nightly release isn't a different. Though nightly build can't be consider a stable version but as it updated daily, you can take the risk. Android 4.4.4 KitKat do comes with many big features over previous version, hence it's always a good idea to update your device to latest Android build when available. You can read through this article for an installation guide of Android 4.4.4 KitKat based custom ROM Omni ROM on Galaxy Note N7000.

Recommended Readings:

• Update Galaxy Note N7000 To Android 4.4.2 KitKat via Omni Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Galaxy Note N7000. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Note N7000 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Galaxy Note N7000. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Galaxy Note N7000.

File Required(Download by clicking on it)

1. Omni Nightly For Galaxy Note N7000  [Filename: omni-4.4.4-20140819-n7000-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Galaxy Note N7000

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note N7000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave only Power button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note N7000 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy Note N7000.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave only Power button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note N7000 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Galaxy Note N7000. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Android 4.4.4 KitKat Omni ROM For Samsung Galaxy Note 8.0 GT-N5110 [How To]

Android 4.4.4 KitKat can now be pushed to Samsung Galaxy Note 8.0 GT-N5110 but not using any official firmware, with the help of custom ROM Omni ROM. Omni ROM developers recently rolled out nightly build of Omni ROM ROM for Samsung Galaxy Note 8.0 GT-N5110 that can update your device to latest Android 4.4.4 KitKat. The latest Omni ROM release is based on Android 4.4.4 KitKat and consider a build that can be used for daily purposes. Omni ROM mostly known for its multi-window feature. We summed up a detail installation tutorial on how to install latest Omni ROM build on your Samsung Galaxy Note 8.0 GT-N5110. You can read the guide below.

Recommended Readings:

• Install Android 4.4.4 CM11 Milestone 9 KitKat ROM on Samsung Galaxy Note 8.0 GT-N5110 – How To Instruction
• How To Root Samsung Galaxy Note 8.0 GT-N5110–Simple Guide
• Update Galaxy Note 8.0 N5110 To Android 4.4.2 KitKat via Omni Nightly–How To
• Update Galaxy Note 8.0 N5110 To Android 4.4.2 KitKat via CM11 Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Samsung Galaxy Note 8.0 GT-N5110. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Samsung Galaxy Note 8.0 GT-N5110 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Samsung Galaxy Note 8.0 GT-N5110. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Samsung Galaxy Note 8.0 GT-N5110.

File Required(Download by clicking on it)

1. Omni Nightly For Samsung Galaxy Note 8.0 GT-N5110  [Filename: omni-4.4.4-20140819-n5110-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Samsung Galaxy Note 8.0 GT-N5110

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Samsung Galaxy Note 8.0 GT-N5110.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Samsung Galaxy Note 8.0 GT-N5110 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Samsung Galaxy Note 8.0 GT-N5110.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Samsung Galaxy Note 8.0 GT-N5110 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Samsung Galaxy Note 8.0 GT-N5110. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Update Samsung Galaxy Note 8.0 GT-N5100 with Android 4.4.4 Omni ROM KitKat [How To]

Omni ROM build for Samsung Galaxy Note 8.0 GT-N5100 that based on Android 4.4.4 KitKat is now available for download. By installing this custom firmware you can enjoy the latest Android 4.4.4 KitKat on your Samsung Galaxy Note 8.0 GT-N5100. Android 4.4.4 KitKat do comes with various added features over previous Android version. By installing Omni ROM you also receive features that a stock Android 4.4.4 KitKat AOSP build can't offer. Though the build we adding in download section is nightly build which update daily with many improvements over previous build. To install this Android 4.4.4 KitKat based custom ROM on your Samsung Galaxy Note 8.0 GT-N5100, you must already have custom recovery installed. Read through this article to learn step-by-step guide about installing Android 4.4.4 Omni ROM custom ROM on Samsung Galaxy Note 8.0 GT-N5100.

Recommended Readings:

• Install Android 4.4.4 CM11 Milestone 9 KitKat ROM on Samsung Galaxy Note 8.0 GT-N5100 – How To Instruction
• How To Root Samsung Galaxy Note 8.0 GT-N5100–Simple Guide
• Update Galaxy Note 8.0 N5100 To Android 4.4.2 KitKat via Omni Nightly–How To
• Update Galaxy Note 8.0 N5100 To Android 4.4.2 KitKat via CM11 Nightly–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Samsung Galaxy Note 8.0 GT-N5100. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Samsung Galaxy Note 8.0 GT-N5100 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Samsung Galaxy Note 8.0 GT-N5100. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Samsung Galaxy Note 8.0 GT-N5100.

File Required(Download by clicking on it)

1. Omni Nightly For Samsung Galaxy Note 8.0 GT-N5100  [Filename: omni-4.4.4-20140819-n5100-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Samsung Galaxy Note 8.0 GT-N5100

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Samsung Galaxy Note 8.0 GT-N5100.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Samsung Galaxy Note 8.0 GT-N5100 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Samsung Galaxy Note 8.0 GT-N5100.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Samsung Galaxy Note 8.0 GT-N5100 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Samsung Galaxy Note 8.0 GT-N5100. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More

Update Oppo N1 with Android 4.4.4 Omni KitKat Custom ROM [How To]

You can now download and install Android 4.4.4 KitKat based custom firmware Omni ROM on your Oppo N1. Omni ROM developers recently release nightly build that enable Android 4.4.4 KitKat on your Oppo N1. A nightly build see update daily with more features and fixes. With Android 4.4.4 KitKat you can enjoy so many new features as well as security and performance improvements. The Omni ROM builds itself comes with so many customization that you won't see in a stock firmware and can't just avoid. Omni ROM mostly known for its multi-window feature. We summed up a detail installation tutorial of Android 4.4.4 KitKat based Omni ROM custom ROM on Oppo N1 below.

Recommended Readings:

• Install Android 4.4.4 CM11 Milestone 9 KitKat ROM on Oppo N1 – How To Instruction
• Update Oppo N1 To Android 4.4.2 KitKat via Omni Nightly–How To
• Install Android 4.4.2 CM11 Milestone 4 KitKat ROM on Oppo N1 – How To Instruction
• Update Oppo N1 To Android 4.4.2 KitKat via AOKP ROM–How To

Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Warning!
This tutorial is only for Oppo N1. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Oppo N1 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise it's won't be possible to transfer file between PC and Oppo N1. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni ROM (Nightly) on Oppo N1.

File Required(Download by clicking on it)

1. Omni Nightly For Oppo N1  [Filename: omni-4.4.4-20140819-n1-NIGHTLY.zip]
2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
3. SuperSU [Filename: UPDATE-SuperSU-v2.02.zip]

How to Install Android 4.4.4 KitKat based Omni (Nightly) ROM on Oppo N1

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Oppo N1.
3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Omni Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package.
8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.02.zip file instead of ROM zip to root your device.
9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Oppo N1 and boot up into Android 4.4.4 KitKat ROM Omni. 
10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Oppo N1.
3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
4. Create a Backup using TWRP Backup Option.
5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.02.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Oppo N1 and boot up into Android 4.4.4 KitKat ROM Omni.
8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni is now running on your Oppo N1. Now explore the latest Android 4.4.4 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Read More